This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
dear ti:
TPS23861 Manual 模式下 如何配置 0x19 Power Enable Register 手动开启对外供电 有参考配置吗
首先你需要把TPS23861配置成 Manual模式，然后对相应的寄存器进行配置，包括分级、电流等。当通过I2C确认有PD设备的端口，再enable就可以了。没有侦测到PD是无法强行供电的
