• 状态
  • 已锁定 已锁定
  • 回复 2 回复
  • 订户 55 订户
  • 视图 1110 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

1. 用BQ40Z80做7串电池，将第13脚配置成DISP功能异常

user4973425
Prodigy 20 points
Other Parts Discussed in Thread: BQ40Z80

  1. 用BQ40Z80做7串电池，将第13脚配置成DISP功能(Pin Configuration==0x000)

  2. 配置完成后，测试第13脚对地短路电流>5mA，按下开关（第13脚）也无任何反应，请问一下，如何配置？

  3. 通讯正常，充电时LED亮灯正常，电压容量等，都显示正常。