If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
利用Fusion烧写完成之后出现下列情况：
There was an unrecoverabal error while refreshing one or all parameters from the device .
This usually indicates tatal communication loss or the device has become unrespinsive. The exact error was:
Error reading bank 0x0 on rail #2:error setting bank to 0x0 on ral #2: CLA_BANK write 0 [0x00] on UCD 9222 @Address 78 error:NACK
If you believe this is an error in Fusion Digital Power Designer, please contact Texas Instruments support.
利用Fusion烧写完成之后出现下列情况：
There was an unrecoverabal error while refreshing one or all parameters from the device .
This usually indicates tatal communication loss or the device has become unrespinsive. The exact error was:
Error reading bank 0x0 on rail #2:error setting bank to 0x0 on ral #2: CLA_BANK write 0 [0x00] on UCD 9222 @Address 78 error:NACK
If you believe this is an error in Fusion Digital Power Designer, please contact Texas Instruments support.
