This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我们做了一款产品，是半桥硬开关，工作频率20K，采用的是28069的峰值控制方式，峰值电流取自主变原边，三相输入电压到了300左右，原边电流到了一定程度，单边出现冒尖，具体如下图，请问是否是我软件设置不合理造成。谢谢！
