Other Parts Discussed in Thread: TL431,
1、模块在各载下一直处于断续突发模式,请问如何暂时先不配置突发模式。去掉突发模式在调试。
2、FB 脚测得电压在死区时间内有个大负压-990mV,请问是怎么回事。该如何调试呢?
波形3通道为芯片FB脚-粉色, 2,4通道为上下管驱动波形。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
见datasheet 31页描述,burst mode 模式在轻载时可提高效率。 无法关掉这个模式。
FB电压来自光耦,从电压上看不应该出现负压,确认一下测试。
好的,请问有UCC256301 datasheet中demo板的 关于 TL431+光耦反馈补偿的相关设计文档吗?
Hi
没有针对这部分的详细设计说明,主要是它就一个外围的光耦连接。
只是在下面文档也提了下,可以看看: www.ti.com.cn/.../slua836a.pdf