BQ76952 I2C调试问题描述:
发送设备地址0x10后,有时候接收不到bq76952的应答信号,有时候能接收到。
当设备地址有应答时,8个时钟波形正常,当没有应答时,前五个时钟波形比后面三个要低。数据波形会有齿状杂波。I2C时钟频率400k和100k都试过,问题一样,各个时间段也和芯片手册对应上了。
后来把I2C隔离芯片去掉,直接连上BQ76952的I2C,还是一样的状况。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.