This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
各位大神好，项目中分别需要+12V锂电池供电（电流分别8A和2A），需求对应的电池充电管理芯片对锂电池进行充电、放电管理，请各位大神推荐2款可用电池充电IC，谢谢
您好，8A充电器请参考下面链接
https://www.ti.com.cn/zh-cn/power-management/battery-management/charger-ics/products.html#p1152=3;3&p338=Li-Ion/Li-Polymer&p1153max=8;10&p273=Flash%20Charger;Linear;Switch-Mode%20Boost;Switch-Mode%20Buck;Switch-Mode%20Buck-boost
2A充电器请参考下面链接
https://www.ti.com.cn/zh-cn/power-management/battery-management/charger-ics/products.html#p1152=3;3&p338=Li-Ion/Li-Polymer&p1153max=2;5&p273=Flash%20Charger;Linear;Switch-Mode%20Boost;Switch-Mode%20Buck;Switch-Mode%20Buck-boost
好的，谢谢大神
您好，很高兴您的问题已经解决。
您好，我们采用的BQ24600芯片并参考推荐电路设计BUCK电路，在芯片输出PWM信号，是否需要添加驱动器加强驱动？
