This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
目前，INA和INB都有pwm信号输入（互补）100kHz
OutB输出正常，但是OUTA一直输出高电平（7V左右）
实际参数都和图上一样，请问下是什么问题呢
Hi
PWM 占空比驱动信号正常，但是输出一直为高，确认一下VDDA与OUTA阻抗是否异常？将MOS那边断开增加一个1000pF的电容，看有没有驱动波形出来？
