This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
故障发生的寄存器截图：
具体的配置如下
为什么还是发生了fuse置为关断dsg？怀疑是虚焊导致fuse引脚拉高，这是否可以通过配置其他参数解决呢？？
您好,正常fuse接地以后就不会被拉高了。建议用最新版的固件再试一下。
