如题,配置LM5116输出为-20V时,那第21脚EP在绘制PCB时是接到-20V网络还是接到GND网络,仿真时接到GND或-20V对结果无影响,望告知,谢谢
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
类似buck芯片做负压输出时, Layout时Powerpad需要接-20V, 而非此时的GND.