BQ76952EVM: bqstudio native units意义和bq76952部分单位软件与文档不一致疑问

您好，设计以native unite为准，比如shutdown voltage BQSTUDIO显示的是x10 以后的值。

If you enable the advanced views in BQStudio you will see both the value and units displayed (default 6000 mV) as well as the physical address, data length, row, offset and the native units which are 10 mV.  If you take the 0x9241 physical address and read it in the bq769x2 Command Sequence window from a default part you get back 0x0258 or 600.  The application note https://www.ti.com/lit/pdf/sluaa11 may be helpful

1.那如果我是36V的电池，shutdown stack voltage 想要24V进入，value应该是2400，还是24000？——我看gg文件和bqstudio显示是一致的。

2.问题3，OCC threshold 设置单位 native units是2mV，那我取样电阻是0.5mR，设置值是4，是否意味着电流保护值应该为（4*2mV）/0.5mR = 16A。 为何我实际测下来是8A。——这个和上面回答以 native units为准又是矛盾的。

您好，The issue here is that BQStudio is displaying the value in mV, but the real units are in 2mV steps. So if you want a value of "5" which is 10mV, you just type in 10 in the BQStudio Data Memory window and it automatically writes "5" to the device. 

For example, I write 10 mV to the Data Memory Window and then read the actual register value from the Command Sequence Window below. You can see the actual value in the register is "5". 

There are multiple parameters like this where BQStudio tries to be user friendly. The CC Gain and Capacity Gain parameters for example. You can export a hex dump file if you want to see the actual bits written in data memory.