有这机会,试试新品,3447
先上原理
再来PCB
再就是等,等PCB回来。。。。。。
11月16更新,PCB回来了,材料也准备得差不多了,下一步做样了
11月29日更新,
新打样了PCB,焊上了贴片元件。预计明天可以焊完所有元件。
11月30日更新
焊上了插件元件了
准备下周一开始测试
三个插件焊在背面
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
有这机会,试试新品,3447
先上原理
再来PCB
再就是等,等PCB回来。。。。。。
11月16更新,PCB回来了,材料也准备得差不多了,下一步做样了
11月29日更新,
新打样了PCB,焊上了贴片元件。预计明天可以焊完所有元件。
11月30日更新
焊上了插件元件了
准备下周一开始测试
三个插件焊在背面
功率5W,高压电工作,所以电阻实际功率不超过0.5W。
回 constance 用的EE10的磁芯,做非隔离5W 基本无任何问题
最新进度,试机不能正常点亮,一闪一闪的,间隔812MS,也就是说哪里保护了,但一直没查到。家里设备只有一个万用表。
VCC电压13V多,输出电压能到设定电压。但试到最后时,VCC电解炸了直冒烟,吓得赶紧停工。
请TI专家来解释一下,什么情况会这样闪?我是非隔离的。