This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
UC2825 电压模式，6-7脚短接。
外加12Vcc，启动时11脚与14脚的duty 输出有延时，14脚duty先输出，延时10ms左右，11脚duty才输出，两路互补输出不同步，请问这是什么原因？谢谢
先将6、7脚短接的地方断开，看看是不是还是同样现象。
