This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好，我有尝试过写入FET_ENABLE来启动FET然后使用DSG_PDSG_OFF想来控制DSG引脚输出低电平，想用CHG_PDSG_OFF来控制CHG引脚输出低电平，但是实际上DSG引脚我可以通过DSG_PDSG_OFF来控制输出低电平，而CHG一直是我的BAT的电压值。请问应该如何控制？
您好，FET的使用请参考评估板的用户手册。
www.ti.com/.../sluuc33a.pdf
