This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The current product is BQ4050.
When the charger supplies the battery, the SOC directly jumps from around 92% to 100%, and once loaded, it will drop from 100% to 92%.
Where does it need to be adjusted?
您好，是否配置CECV的相关参数，建议使用GPCCEDV tool配置参数。
有的，上传了相应曲线并回传了数据，学习成功之后max error 为2%。且前期出货时充放电柜上做循环记log 未出现这种情况
您好，请确认是不是在低温环境下出现这种现象。如果是在常温下建议您将log数据gg文件发过来看一下。
