TPS7B7701-Q1: 诊断输出短路到电源(short to battery)时 ，ERR是高，没有拉低，SENSE1 ADC通道值是0

HI

    确认一下是否如下：

    At this moment, if the device detects the short-to-battery fault, the LDO switch is latched off, the ERR pin is asserted low, and the fault-channel SENSE voltage is pulled up internally to a voltage rail between 3.05 V and 3.3 V.

Hi TI expert,

      如case描述，short to battery时，ERR pin一直是高，没有拉低，SENSE voltage是0.

Hi

    确认一下是否芯片损坏？