• 状态 Resolved
  • 已锁定 已锁定
  • 回复 2 回复
  • 订户 55 订户
  • 视图 1824 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27545量產文件一問 ???

Steven CHEN
Intellectual 715 points
Other Parts Discussed in Thread: BQEVSW, BQSTUDIO, BQ27741EVM

各位 : 

          我已經借由 battery management studio 配置完成 , 並且得到了 .srec  bq.fs  df.fs  三個檔案 , 

          請問df.fs該文件是否為量產文件 ?

          我又該如何借由 battery management studio 配置成 HDQ 模式 ?

  • 0
    Guru 23982 points

    你好，目前手头只找到该器件基于BQEVSW BQeasy软件进行量产的步骤和指导信息 ，请参考如下链接。

    http://www.ti.com.cn/general/cn/docs/lit/getliterature.tsp?baseLiteratureNumber=slua504&fileType=pdf

  • 0 回复 Michael Yang
    Guru 23982 points

    这个BQstudio还比较新，一些相关的支持文档还没有同步公开，请参考与之类似器件的 基于BQstudio的指导文档

    见如下链接中 User Guides (2)  bq27741EVM Single-Cell Impedance Track™ Technology Evaluation Module 。

    http://www.ti.com/tool/bq27741evm

    其中的section 11提到如何找转换HDQ的界面

    11 Send HDQ Screen
    To configure a bq27741 into HDQ mode, navigate to the Send HDQ screen. It is possible that all the
    screen options on the left are not visible depending on screen resolution. If needed scroll within the left
    menu to access the Send HDQ link. Click on the "Change comm to HDQ8" button while having the
    bq27741 connected to the EV2300 via I2C. Clicking on the button causes a message to appear indicating
    that the process is not reversible and to confirm if the actions are desired. Also, it explains what to do
    once the HDQ mode has been activated.
    Once converting the bq27741 into HDQ mode, it is required that you connect the HDQ terminal of the
    EV2300 with the HDQ connector (J4) of the bq27741 EVM, then restart the EVSW, and select the
    "bq27741HDQR1" with the proper firmware version from the list of supported devices within the EVSW.