This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
你好，原来我们做了一版3A的板子，测试电量常温不跳变，低温不跳变，后因为客户改大电流7A，电池组不变，我们重新设计板子，把原先5mr的采样电阻换成1mr，把原先采样NTC的位置挪动了，现在电池检测到的温升较低，程序还是原先3A的程序(有改过流值)，目前电量跳变 常温下正常是放电到6V为0%,现在放电到6.6V 电量就到0%。请问是什么原因
您好，请确认smooth功能是否使能。
