Other Parts Discussed in Thread: BQ25731
您好,请问采用PD3.0的Type-c适配器协议充电,需要在充电管理芯片前端加一个type-c取电芯片吗,我看到参考手册里直接把Type-c适配器接到芯片上,没有接cc1和cc2引脚,那这个是怎么取电压的呢?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好,我们有一个符合 PD 标准的 USB C 充电器的参考设计。我们使用 BQ25731,有 I2C 接口,与 PD 控制器相同,请参考下面链接: