This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
电路图如下，在测试中发现理想二极管处的MOS管驱动DGATE驱动电压输出比较低，电压在4V左右，无法驱动MOS，麻烦帮忙查找原因，谢谢
Hi
将驱动电阻1kohm改为0ohm看看？
您好
直接将DGATE和MOS G极短接，电压更低了
确认一下Cap的电容。
另外你们做了多少板子？ 是所以板子都这样，还是样板这样？
您好，
目前已经参考如下资料解决，谢谢
Ideal Diode Controller or ORing Controller gate voltage is lower than expected
感谢分享。
