这些是所有的配置情况,我对我的板子上电后,给芯片配置好,点击shutdown后,MON5和MON6上有一个持续的1.9V左右的电平存在,我将我接入的电源断开后,这个电平也存在,所以应该是PFM芯片内部输出的一个电平。
这是我点击shutdown后的状态:
这是我的原理图:
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
建议你将这个问题放到美国E2E: https://e2e.ti.com/
我这边没有这个板子可以调试看到你的问题,不过美国E2E那边有这个芯片产品线的工程师,他们有板子同时也熟悉这个芯片的电路控制。