BQ25606的电池充电脚不接入电池,VBUS供电5V,总共3块板,有一块出现PG脚常亮的现象,是哪里的原因?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好,请参考下面内容
Please visit https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/890626/faq-bq25606-schematic-review-and-pcb-layout-design-tips for BQ25606: Schematic Review and PCB Layout Design Tips. Additional Information including FAQs is available http://www.ti.com/lit/an/slva924/slva924.pdf Designing A Standalone Single Cell 3-A Charger with the bq25606.
您好,方便提供原理图吗?板子上的PG引脚和其他两块板子有什么区别? STAT 引脚是什么状态?
在评估板上,当在没有电池的情况下有输入时,PG LED 亮起(PG 低)
您好,在上面的帖子中没有看到您的原理图。非常抱歉没有解决您的问题,为更加有效地解决您的问题,我们建议您将问题发布在E2E英文技术论坛上https://e2e.ti.com/support/power-management/f/196,将由资深的工程师为您提供帮助。我们的E2E英文社区有TI专家进行回复,并得到全球各地工程师的支持,分享他们的知识和经验。
您好,您的电路之前在E2E internal 发帖询问过,给的建议如下:STAT 和 PG 引脚损坏的情况很少见。请尽量减少连接线的寄生现象。如果不遵循设计指南,STAT 和 PG 引脚可能无法正常工作。
Please visit https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/890626/faq-bq25606-schematic-review-and-pcb-layout-design-tips for BQ25606: Schematic Review and PCB Layout Design Tips. Additional Information including FAQs is available http://www.ti.com/lit/an/slva924/slva924.pdf Designing A Standalone Single Cell 3-A Charger with the bq25606.
您好,非常抱歉没有帮您解决问题,为更加有效地解决您的问题,我们建议您将问题发布在E2E英文技术论坛上https://e2e.ti.com/support/power-management/f/196,将由资深的工程师为您提供帮助。我们的E2E英文社区有TI专家进行回复,并得到全球各地工程师的支持,分享他们的知识和经验。