This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
你好，我想问一下如何开启CEDV算法，这个开关在那里？是在setting里面，还是Commands命令？
另外开启了之后 有没有标志位显示？这张图是我现在设置的状态
您好，在 Gauge Configuration 中设置CEDV bit
是这里？
我没找到 CEDV bit
您好，对应的是EDV_CMP (Bit 3): Dynamically calculate voltages for EDV2, 1, and 0
是这里？