This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Original question:
关于BQ25703不能充电
插入适配器后不能充电，batt+没有电压供电池充电，这颗芯片不用I2C能否充电呀？
您好，在写入 ChargeCurrent 寄存器（寄存器默认值为 0A）之前，该器件不会开始充电。
详细请参考数据手册9.6.2 ChargeCurrent Register (I 2C address = 03/02h) [reset = 0000h]
VSYS=9.46V; BATT+=10.46（电池电压）充电暂还没解决；另只接电池不插充电器时： BQ25730_1PIN_VBUS有2.0V, 这是否为正常？
您好，建议您用评估版做一下相同测试，确认是什么问题。
