hi,
我在使用TPS56C230,设计输入12V,输出3.9V。板子回来上电测试发现,未接负载的状态下 ,万用表测试量电压3.9V 电压左右,但是用示波器交流模式测试输出,出现如下的波形:
原理图如下:
pcb layout 设计如下:
可能是哪里出问题呢
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
Datasheet没有明确空载下可以稳定的输出,而评估板虽然给出的负载范围是从0A开始,但是提供的波形和datasheet一样并非最小是0A,而是10mA.
按照你的测试,如果带载10mA是否正常? 可以参照评估板user guide: https://www.ti.com.cn/cn/lit/ug/slvubj0b/slvubj0b.pdf 第9页图4~6.