BQ76952: exit deepsleep mode

yubin zhang

Part Number: BQ76952

When the device exits DEEPSLEEP mode, it first completes a full measurement loop and evaluates conditions relative to enabled protections, to ensure that conditions are acceptable to proceed to NORMAL mode.
What conditions relative to enabled protections are evaluated?

6 个月前

0 Star Xu 6 个月前

TI__Guru*** 130456 points

您好，正在询问更了解这款芯片的TI工程师，稍后回复。

+1 Star Xu 6 个月前回复 Star Xu

TI__Guru*** 130456 points

您好，请参考下面内容：

Whenever the device exits DEEPSLEEP, it will go straight into NORMAL mode. Then checks the conditions to decide if it needs to enter SLEEP mode.

Protections should be enabled as soon as the device enters NORMAL mode.

0 yubin zhang 5 个月前回复 Star Xu

Prodigy 10 points

Before proceed to NORMAL mode, it first completes a full measurement loop and evaluates conditions relative to enabled protections, I am wondering during this period (it seems to take 250 ms and all FETs are OFF), what conditions relative to enabled protections are evaluated?

0 Star Xu 5 个月前回复 yubin zhang

TI__Guru*** 130456 points

您好，看到E2E英文论坛的帖子您已经回复，请继续关注该帖。

e2e.ti.com/.../bq76952-bq76952-exit-deepsleep-mode

电源管理

电源管理论坛

BQ76952: exit deepsleep mode