我经过测试发现tps62250的en使能引脚拉低后,tps62250 仍能输出大约0.7v左右的电压,而且这个电压不是虚的,能够在几十ma的负载,请问这是怎么回事,如果问题不能解决,我还需要在tps62250电路的前面后者后面加上mos管,用来彻底关断电源。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我经过测试发现tps62250的en使能引脚拉低后,tps62250 仍能输出大约0.7v左右的电压,而且这个电压不是虚的,能够在几十ma的负载,请问这是怎么回事,如果问题不能解决,我还需要在tps62250电路的前面后者后面加上mos管,用来彻底关断电源。