This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1.通过BQStudio连接锂电池管理电路板，通过Commands窗口设置BQ40Z50位UNSEAL模式，然后通过Commands窗口设置CHG_FET_TOGGLE。结果Registers窗口可以看到CHG_TEST为1。但是OperationStatus中的XCHG也为1。也就是说Charge模式没有使能，请问是什么原因？
可以将整个Register的状态截图么？
如上图，不能充放电。请求指导。
