我目前有一个10V供电和一个1.8V供电,整个系统都是1.8V电压的。但是1.8V和10V电源的负载我都不知道,能否有方案可以将10V转为1.8V的同时有方法将原有的1.8V电源与转化来的1.8V电源连在一起同时向系统供电,而不产生冲突?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
感谢您对TI产品的关注!
关于你的咨询,你可以找一个DCDC-buck的可调芯片,降压后通过肖特基二极管一起跟1.8V给你的负载供电。
Schottky二极管是防电流反向的,注意Schottky二极管的压降。