CC Offset和Board Offset校准后,电流还是0
1A放电校准电流后,零点电流始终是6mA左右,再次校零也不行
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
关于电流校准,请参考下面资料的3.3.3 Current Calibration章节:
bq34z100EVM Wide Range Impedance Track Enabled Battery Fuel Gauge (Rev. B) (ti.com)
还可以参考这个current calibration的视频: