1. 我有两个和众达的560plus仿真器,能否通过14转60pin的转接头对EVM6678进行调试?
2. 要自己设计6678的电路板,电源为5V供电,应该选用什么样的电源方案,TI|有没有建议的电源方案?
3. 在CCS里生成的.out文件怎么烧写到flash里面,烧哪种flash比较快,比较方便?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1. 我有两个和众达的560plus仿真器,能否通过14转60pin的转接头对EVM6678进行调试?
2. 要自己设计6678的电路板,电源为5V供电,应该选用什么样的电源方案,TI|有没有建议的电源方案?
3. 在CCS里生成的.out文件怎么烧写到flash里面,烧哪种flash比较快,比较方便?
Weihua,
2. 要自己设计6678的电路板,电源为5V供电,应该选用什么样的电源方案,TI|有没有建议的电源方案?
对于CC6678,TI有有提供相应的电源参考方案,可实现电压的动态调节。