This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好：
开发板是TMDXEVM6678LE，是怎么设置选择板载XDS100仿真器还是外部XDS560仿真器的，谢谢！
EVM LE连上板子自带的mini USB后是支持xds100，连上上面子板的mini USB后是选择blackhawk usb 仿真器，EVM setup及相关资料如下。
http://processors.wiki.ti.com/index.php/TMDXEVM6678L_EVM_Hardware_Setup
http://www2.advantech.com/Support/TI-EVM/6678le_of.aspx
我连接板子自带的xds100，debug的时候显示“The controller has detected a cable break far-from itself. The user must connect the cable/pod target”,谢谢！
