• 状态
  • 已锁定 已锁定
  • 回复 1 回复
  • 订户 13 订户
  • 视图 363 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

6678的多核导航器中的channel与core有没有对应关系？？？

xt guo
Intellectual 771 points


6678的多核导航器中的channel与core有没有对应关系？？？

比如channel 0 对应core 0,channel 1对应core 1;

所以当你设置cfg.channel为1时，数据都由core 1接收

这是我论坛上看到的一句话，想问一下解释的正确吗？

  • 0
    TI__Guru**** 357097 points

    core0，core1都可以访问channel0，channel1. 请看Section 5.3.1 IDMA Channel 0 and Section 5.3.2 IDMA Channel. Channel 0 is used to access cfg space & channel 1 is used for data transfer between local memories.