你好!
我的板子在上电后能连上仿真器,但初始化PLL后,就会断仿真报如下错误
C66XX_0: Power Failure on Target CPU
如何解决或排查问题,谢谢!!!!!!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
你好!
我的板子在上电后能连上仿真器,但初始化PLL后,就会断仿真报如下错误
C66XX_0: Power Failure on Target CPU
如何解决或排查问题,谢谢!!!!!!
请问你是使用GEL文件初始化PLL的吗?还是采用代码初始化的?在初始化前,建议检查下供电和时钟以及SYS CLOCK输出是否正常