This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DSP6678 CCS5.5版本下多核并行计算



6678,在多核计算过程中,不用BIOS操作系统和多核导航器的情况下,怎样把8个核都运行起来,且同步运行,怎样知道当前计算的是那个核,

  • 同步方法可以下面的多核编程手册,可以用DNUM来表示核号。
    For non-navigator data transport, after communication message data is prepared by the sender for delivery to the receiver using shared, dedicated, or transitional memory, it is necessary to notify the receiver of the message availability. This can be accomplished by direct or indirect signaling, or by atomic arbitration.
    www.ti.com/.../sprab27b.pdf
  • 在仿真器下,主核通过IPC唤醒其他核心的过程我的理解是这样1、变为全局地址;2、循环在每个核的boot magic address地址赋main和入口地址,3、产生IPC的91号核间中断 ;4通过DNUM区分不同的核,来让第一个核作为主核心,其他核作为从核;不知道我这样的理解对不对

  • 在仿真器下,主核通过IPC唤醒其他核心的过程我的理解是这样1、变为全局地址;2、循环在每个核的boot magic address地址赋main和入口地址,3、产生IPC的91号核间中断 ;4通过DNUM区分不同的核,来让第一个核作为主核心,其他核作为从核;不知道我这样的理解对不对