大家好,
我在使用C6748通过I2S读取ADC的数据,C6748为从机,读取只保留右声道数据,数据位数为16位,当我使用轮训的方式读取时,读取的数据正常,但当使用EDMA读取时,读取的数据每一个间隔都有一个零(如下图),这是怎么回事。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
大家好,
我在使用C6748通过I2S读取ADC的数据,C6748为从机,读取只保留右声道数据,数据位数为16位,当我使用轮训的方式读取时,读取的数据正常,但当使用EDMA读取时,读取的数据每一个间隔都有一个零(如下图),这是怎么回事。