This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
由于项目的要求，重画了底板，底板只有一个网口eth0.基于惯性和移植AM3358改网口的经验。想要通过修改dtb去实现。但是怎么使都不好使，希望能得到贵公司相关技术支持。
感谢
感谢您的回复和关注^_^
&mac {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_pins_default>;
pinctrl-1 = <&cpsw_pins_sleep>;
//dual_emac;
};
&cpsw_emac0 {
phy-handle= <&phy0>;
phy-mode = "rgmii";
// dual_emac_res_vlan = <1>;
/* &cpsw_emac1 {
phy-handle= <&phy1>;
dual_emac_res_vlan = <2>;
}; */
我已经尝试这样改了…但rx=0，ifconfig up后显示eth0未挂载到slave1？……
