在将mcspi 擦写Flash 代码集成到工程中后，单步调试代码，关闭看门狗，但是代码经常会跑到未知位置，如Exception中 ，
ti_sysbios_family_arm_exc_Exception_excHandlerDataAsm__I:
stmfd sp!, {r0-r12} @ save r4-r12 while we're at it
stmfd sp!, {r0-r12} @ save r4-r12 while we're at it
mrc p15, #0, r12, c5, c0, #0 @ read DFSR into r12
stmfd sp!, {r12} @ save DFSR
mrc p15, #0, r12, c5, c0, #1 @ read IFSR into r12
stmfd sp!, {r12} @ save DFSR
mrc p15, #0, r12, c6, c0, #0 @ read DFAR into r12
stmfd sp!, {r12} @ save DFAR
mrc p15, #0, r12, c6, c0, #2 @ read IFAR into r12
stmfd sp!, {r12} @ save IFAR
stmfd sp!, {r12} @ save DFSR
mrc p15, #0, r12, c5, c0, #1 @ read IFSR into r12
stmfd sp!, {r12} @ save DFSR
mrc p15, #0, r12, c6, c0, #0 @ read DFAR into r12
stmfd sp!, {r12} @ save DFAR
mrc p15, #0, r12, c6, c0, #2 @ read IFAR into r12
stmfd sp!, {r12} @ save IFAR
请问该问题是因为发生了中断还是因为什么，单步跟踪代码将其它Task注释掉么？
