通过串口终端发送0x0D后,从串口接收到数据被转换成了0x0A 请问是否可以修改UART该部分配置,那么请问在哪里可以进行修改!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
通过串口终端发送0x0D后,从串口接收到数据被转换成了0x0A 请问是否可以修改UART该部分配置,那么请问在哪里可以进行修改!