This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
pruss2_eth如何修改为rmii，pyh地址是在设备树中修改还是在源码中
在设备树中修改phy-mode.
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/953514/am5718-pruss2_eth-single-emac-problem
https://software-dl.ti.com/processor-sdk-linux/esd/docs/08_00_00_21/linux/Foundational_Components/PRU-ICSS/Linux_Drivers/PRU_ICSSG_Ethernet.html#eth-phy-bundings
user3688025 说：pyh地址是在设备树中修改还是在源码中
我暂时没有看到修改的位置，确认一下再给你回复。
