你好：
我在移植j721代码到j7200上时，遇到CAN例程代码里的 I2C扩展芯片代码部分I2C_transactionInit里面的I2C_transfer函数，当运行到status = handle->fxnTablePrt->transferFxn(handle,transaction);指令后无法继续运行后面的代码
代码只是更换了配置引脚写入寄存器地址部分。
-
Ask a related question
What is a related question?A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
