This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA3MV: 启动bootstrap寄存器与设置不一致。

Part Number: TDA3MV
Other Parts Discussed in Thread: TDA3XEVM

hello 大家

    我自己参考TDA3XEVM设计了一个TDA3MV的板子,现在软件基本都调完了,但是现在发现固化启动出了问题,经过调试发现,每次读取的boot_strap值与拨码开关设置值不一致,并且现在调试界面读取的ctrl_core_bootstrap总是0x80b8,即使我把管脚直接短接到3.3V或者地,读取值总是不变的。现在sysboot的16个管脚除了sysboot7全部只与拨码开关与S29GL512连接,sysboot7连接W25Q64的D2连接。上电时序也测试过没有问题。我想知道还有什么地方会影响这个值的读取?