This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
如下图：
能不能选mode1的MMC1_dat0_mux2到MMC1_dat3_mux2，然后选MMC1_dat4_mux0 到MMC1_dat7_mux0
这样就分别选择mux0和mux2 两组信号，这样可行？
不可以，这是I/O set violation，pinmux会有异常颜色提示
已经变成橘黄色了，注意上面的颜色提示
