• 状态
  • 已锁定 已锁定
  • 回复 2 回复
  • 订户 14 订户
  • 视图 916 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OMAPL138的UBOOT问题

genghua wan
Prodigy 70 points


各位工程师，大家好！有个问题想请教大家一下。我刚装配好的印制板，首先要对OMAPL138进行UBOOT，但是在我装载一个合众达开发板的*.out文件后点击运行，出现了这样的错误，麻烦大家帮忙找出问题，谢谢！

错误：The CIO command cmd : (0) in the CIO buffer at address (0xc101bfb0) was not recognized. Please check the device and program memory maps.

在上一批板子上没有此问题。