Hi all,
目前在做6670boot,现在已经将.out文件转换问hex文件了,但是转换完之后的文件中带有两个符号,请问这个符号也需要写到EEPROM中吗?我们采用的是I2C master
boot 方式。下图是我们的hex文件截图,就是文件开头那个符号。

Thanks
Nick
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi all,
目前在做6670boot,现在已经将.out文件转换问hex文件了,但是转换完之后的文件中带有两个符号,请问这个符号也需要写到EEPROM中吗?我们采用的是I2C master
boot 方式。下图是我们的hex文件截图,就是文件开头那个符号。

Thanks
Nick