This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Original question:
SK-AM62: 如何安装k3conf
你好：
从SD卡启动到尝试EMMC启动过程中，SD卡uboot中的uEnv.txt如何烧写到emmc。
https://dev.ti.com/tirex/explore/node?node=A__AHRrRyaBVyh3lIzvQ8a6tQ__linux_academy_am62x__XaWts8R__LATEST&search=am62x
已咨询e2e工程师，请关注帖子的回复。https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1257906/sk-am62-flash-sd-uboot-uenv-txt-to-emmc
请看下面e2e工程师的回复。
uEnv.txt is for MMC SD card boot only.
There's an earlier e2e post on "saveenv" to eMMC on AM57xx device.https://e2e.ti.com/support/processors-group/processors/f/processors-forum/913291/am5718-saveenv-error-when-booting-emmcWill you have a look at it to see if it helps on your setup
