This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
yong xuan 说：我对我的SK-TDA4VM分别烧录了09.00.01.03 (12 Oct 2023)和09.00.00.08 (11 Aug 20
请问是RTOS processor SDK还是Linux processor SDK?
有CAN driver，请看下面的processor sdk user guide。software-dl.ti.com/.../MCAN.html
你好，我知道板子上面是有can引脚的
我想问的是为什么09.00.01.03 (12 Oct 2023)和09.00.00.08 (11 Aug 2023)版本的输入ifconfig -a没有can输出呢？
你看这是08.06.00.11 (14 Mar 2023)版本的
yong xuan 说：按照操作指导，尝试后仍然是
请问具体是怎么操作的？
你说的这个
Shine 说：有CAN driver，请看下面的processor sdk user guide。software-dl.ti.com/.../MCAN.html
另外，请看我附的图，谢谢
已咨询产品线工程师，请关注下面帖子的回复。https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1293716/tda4vm-does-sdk-09-00-01-03-support-can
请看下面e2e工程师的回复。
In k3-j721e-common-proc-board.dts file , you have nodes for respective instances such as
&mcu_mcan0 {pinctrl-names = "default";pinctrl-0 = <&mcu_mcan0_pins_default>;phys = <&transceiver1>;
status = "disabled";};
If you want to use the respective instance then remove status = "disabled"
&mcu_mcan0 {pinctrl-names = "default";pinctrl-0 = <&mcu_mcan0_pins_default>;phys = <&transceiver1>;};
