• 状态
  • 已锁定 已锁定
  • 回复 0 回复
  • 订户 13 订户
  • 视图 220 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DSP程序运行就出问题如下致命错误了~~大家帮看看啊~~

qiqi michal
Intellectual 320 points


程序循环几次了之后就出现了下面的错误了，想问下回是什么原因

 SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The linear system could not be solved.
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The linear system could not be solved.
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The linear system could not be solved.
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The linear system could not be solved.
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The linear system could not be solved.
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The linear system could not be solved.
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The linear system could not be solved.
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The linear system could not be solved.
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The knots must be strictly increasing, but
[C674X_0] T=-155028.500000
[C674X_0] t=-155028.500000
[C674X_0]
[C674X_0] SPLINE_CUBIC_SET - Fatal error!
[C674X_0] The knots must be strictly increasing, but
[C674X_0] T=-155028.500000
[C674X_0] t=-155028.500000