This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
板子上的C6748在上电之后测复位信号引脚RESETn是低电平，应该是高电平吧？ 因为板子一直在CCS下进不去debug模式看手册应该是高电平吧，这是我的复位信号的原理图，麻烦看看这样对吗，谢谢
RESET信号是在电源，时钟起来稳定后拉低一段时间后再拉高，拉低时间需要符合手册上第84页上的时序图。http://www.ti.com/lit/ds/symlink/tms320c6748.pdf
