• 状态
  • 已锁定 已锁定
  • 回复 8 回复
  • 订户 14 订户
  • 视图 1745 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TI-SDK-7.0 启动问题

kun huang2
Expert 1010 points


大家好！

          开发板没有EEPROM，启动的时候找不到ID

       U-Boot SPL 2013.10-g78d8ebd (Mar 30 2014 - 20:46:34)                            
i2c_probe: pads on bus 0 probably not configured (status=0x10)                  
Could not probe the EEPROM; something fundamentally wrong on the I2C bus.       
Could not get board ID.                                                         
i2c_probe: pads on bus 0 probably not configured (status=0x10)                  
Could not probe the EEPROM; something fundamentally wrong on the I2C bus.       
Could not get board ID.                                                         
Unknown board, cannot configure pinmux.### ERROR ### Please RESET the board ###

怎么解决